Installation is as Easy as 1-2-3

Pagoda Vent Installation Instructions


One [1] Pagoda Vent™

Four [4] self tapping screws


Locate your subsurface system standpipe.

Cut the stand pipe off 4”-6” above the finished grade.

Slide the Pagoda Vent over standpipe.  Be sure the plastic pipe underneath is cut low enough so that when set, the base of Pagoda Vent is at finished grade. Secure Pagoda Vent with self tapping screws provided.  

Note! BEFORE screwing in place you can use a level to make sure your Pagoda Vent is standing plumb.  

For best visual results your Pagoda Vent should be level and the base of the unit should sit flush on finished grade.